 |
| CMC TECHNOLOGIES PTY LIMITED
Unit 19,77 Bourke Road , Alexandria , NSW 2015 Australia Tel: +61 2 9669 4000 Fax: +61 2 9669 4111 |
 |
| BRILEX GmbH - Germany - Explosion Vents/Panels, Sensors and Accessories - Single Section Designs - Many configurations and sizes.
Specially designed for relief from dust and gas explosions that often occur in the powder processing industries. Research has shown that by reducing the weight on the pressure relief element, the reaction and opening time will be considerably shortened. BRILEX - a manufacturer of explosion vents, combines safety and faster opening times with all their explosion vent designs. The light and simple construction guarantees a quick and safe opening of the disc. The double folded edges allow for the placement of the fracture points in the protected flange area. This leads to close tolerances and a very strong service life. BRILEX has 100% control of the production process with in-house laser cutting facilities. Fast delivery on special sizes is generally not a problem. BRILEX has developed various types of explosion relief devices. The latest includes a range of flameless devices - IndoorVents for venting of dust explosions inside production buildings. The prevents a secondary and catastrophic secondary dust explosion by quenching the flame generated bu a dust explosion. |  |
|
|
 | BRILEX GmbH - Explosion Vents - Catalog
Brilex Single Section Design Explosion Vents / Explosion Panels - Reducing the weight of the explosion vent improves ... |
|
|
|
 | BRILEX GmbH - Explosion Vents - Catalog Updated
With the introduction of the patented Brilex IndoorVent for venting of dust explosions inside production buildings, Brilex has ... |
|
|
|
 | BRILEX GmbH - Explosion Vents - Single Section Design - for heavier duties - GE
Brilex Type GE is a very accurate explosion vent/explosion panel that reliably resists pressure and vacuum cycling conditions ... |
|
|
|
 | BRILEX GmbH - Explosion Vents - Dynamic Explosion Test - GE with Insulation
Brilex Explosion Vents have been dynamically tested by independent authorities All Brilex explosion Vents are now supplied with ... |
|
|
|
 | BRILEX GmbH - Indoor Explosion Vents / Flameless Vent IndoorVent EXL
Brilex has extended its range of Indoor Vents / Flameless vents with the introduction of the Brilex IndoorVent ... |
|
|
|
 | BRILEX GmbH - Explosion Vents - Indoor Explosion Vents - IV
Brilex Indoor Explosion Vents are used where flameless indoor explosion venting is required. In many instances explosion venting ... |
|
|
|
 | BRILEX GmbH - Indoor Vent - Sanitary Cover IV - SanCover
Brilex sanitary cover for use on the IndoorVent - flameless explosion vent device. The cover reduces maintenance by ... |
|
|
|
 | BRILEX GmbH - Explosion Vents - on ductwork KE
Brilex Explosion Vents or bursting discs for dust explosion relief are used in areas where a high risk ... |
|
|
|
 | BRILEX GmbH - Single Section Design - KER
Type KER is a flat single section design explosion vent suitable for non - pulsating duties. It has ... |
|
|
|
 | BRILEX GmbH - Vent Duct Cover RAD
The Brilex Vent Duct Cover enables isolation of the vent duct downstream of the explosion vent. The Vent ... |
|
|
|
 | BRILEX Gmbh - Explosion Vents - With Insulation Rockwool in Aluminium Cover or Armaflex
Insulation is available as an option with all Brilex explosion vents. Standard material is rockwool inside a sealed ... |
|
|
|
 | BRILEX GmbH - Explosion Isolation - Non Return Valve RSK
In event of a dust explosion in a filter/dust collector, the explosion can travel back via the inlet ... |
|
|
|
 | BRILEX GmbH - Explosion Vents - Sensors for Explosion Vents SE
Brilex supplies an explosion vent sensor that is installed separate to the explosion vent. The sensor is mounted ... |
|
|
|
| [ Home ] [ About Us / Whats New ] [ Products - Catalogs ] [ Contact Info ] [ Inquire ] |
| [ Policies/Statements ] [ Web Links ] |
 |