CMC TECHNOLOGIES PTY LIMITED
Unit 19,77 Bourke Road ,
Alexandria ,
NSW 2015
Australia
Tel: +61 2 9669 4000
Fax: +61 2 9669 4111 |
|
Spark and Ember Detector - Control Unit BM4-3 | |
| |
Spark Extinguishing Control Unit BM4-3 |
| |
| The basic BM 4 microprocessor-controlled spark alarm unit consists of 3 control and extinguishing areas. The report memory can store up to 1,000 events. All messages are shown as plain text on a 2-line LCD-display (40 digits each line). The unit records and displays the number of sparks detected, the extinguishing times and whether any machinery has been switched off. All messages can also be printed on the built-in printer (optional). Events can be transmitted and data exchanged with other systems via the standard built-in RS-232 interface. Up to 6 spark detectors can be connected to each line, with built-in individual evaluation device. Each spark detector displays its own number of sparks detected digitally on the LCD-display. Example: D1 : 32 D2 : 44 D3 : 31 D4 : 0Built-in automatic self-monitoring of all spark detection and extinguishing areas. Automatic cyclic testing of all spark detectors. Test procedures are also monitored and any faults displayed immediately (automatic extinguishing water monitoring). If one line is switched off, this is displayed visually and reported.Easy handling for system operators. The LCD plain text display shows, which buttons have to be pressed during operation. All relay outputs (Fire 1+2, secondary detection, failures etc.) are fully programmable. For each range there are two floating 230 V/1A outputs. Extinguishing times and spark thresholds are pre-programmed during commissioning of the system.Visual display for possible extinguishing water heating.Built in emergency power supply for maximum 4 hours operation.Built in emergency power supply for maximum 4 hours operation.Case protection type: IP 54Dimensions: 400 x 400 x 200 mmService-friendly overall design due to plug-in components and assemblies.
|
BM4-3 Microprocessor Based Spark detection control Unit | Features:
-
Easy handling for system operators. The LCD plain text display shows, which buttons have to be pressed during operation.
-
Service-friendly overall design due to plug-in components and assemblies.
-
Dimensions: 400 x 400 x 200 mm
-
Built in emergency power supply for maximum 4 hours operation.
-
Visual display for possible extinguishing water heating.
|
| | Specifications:
-
Case protection type: IP 54
-
Dimensions: 400 x 400 x 200 mm
|
|
| UPC code: | T25 |
|
| Manufactured by: | T and B Electronic |
|
| Made in Germany |
| Payment Methods |
| Cheque or Direct Bank / Telegraphic Transfer |
|
|
| Ref | |
| Description | Spark and Ember Detector - Control Unit BM4-3 |
|
|
|
|
